|
|
LP7700 (LP7EZ + PP7700) |
|
Processing capacity
(actual production) |
135 negative film (24-exp.) |
Print sizes |
Paper widths |
Print capacity (Processed by SP-500) |
|
3R |
127mm |
Approx. 1800 prints/hr |
|
4R |
152mm |
Approx. 1800 prints/hr |
|
Media print |
Print sizes |
Paper widths |
Print capacity (Digital still camera with 4.0 million pixels ) *with highspec PC |
|
3R |
127mm |
Approx. 2000 prints/hr (*2250 prints/hr) |
|
4R |
152mm |
Approx. 1850 prints/hr (*2120 prints/hr) |
|
Print size |
882.5 x 117mm – 305 x 914.4mm |
|
Processing chemicals |
Chemical system CP-49E |
|
Footprint space |
Approx. 1.40m2
Approx. 1.69m2*3
Approx. 1.83m2*4 |
|
Type |
LP7700: Floor type, normal light operation (laser printer, processor, cutter, sorter in one unit) |
|
Exposure system |
LP7700:Scanning exposure system using RGB laser, 300 x 600dpi |
|
Paper magazines |
LP7700: Two built-in paper magazines (standard), three built-in paper magazines and four built-in paper magazines (factory optional) |
|
Paper |
FUJICOLOR Crystal Archive Paper (silver-halide) |
|
Paper widths |
8.9cm, 10.2cm, 11.7cm, 12.7cm,15.2cm, 20.3cm, 21.0cm, 25.4cm, 27.9cm, 30.5cm |
|
Back printing |
Double 40-character lines in backside print |
|
Printer sorter |
14-order sorter or17-order sorter (selectable) |
|
Print condition set-up |
LP7700: Automatic calibration by built-in calibrator *Requires iBeam set-up using a flatbed scanner LP7700-LP7900: Automatic calibration by built-in calibrator |
|
Processor carriage |
Double-line, sheet carriage |
|
Processing time (Dry to dry) |
1 min. 42 sec. |
|
Power requirements |
AC 200 – 240V (50/60Hz) Single-phase 31A, Three-phase three-wire 20A, Three-phase four-wire 14A, Approx. 6.7 KVA |
|
Dimensions |
W1,660 x D953 x H1,375mm
W2,060 x D953 x H1,375mm*3
W2,260 x D953 x H1,375mm*4 |
|
Weight (during actual operation) |
Approx. 572kg (Approx. 665.4kg) |
